All these years Halon 1301 has been
recognized as one of the most effective clean fire
extinguishing agents. It was installed in computer rooms and
control rooms where it caused no residual damage to expensive
equipment. It was also easily installed by professionally
trained engineers. But Halon 1301 was identified as one of the
worst offendors to the Ozone layer.
The new clean and ozone friendly fire suppression agent FS 49
C2 (halogl IIB) offers an outstanding combination of
firefighting efficiency, low cost, high stability,
non-corrosive, non-conductive agent and ease of use.
With the phaseout of Halon 1301, alternative have been tested
and evaluated for Halon 1301 on the market. No other gas
offers the same safety and economy advantages as FS 49 C2 (halogl
IIB)
FS 49 C2 (halogl
IIB)
- A clean extinguishing
agent – residue free.
- Compatible with existing Halon systems.
- May be used in existing Halon systems.
- Quick-acting.
- Favourable weight/volume ratio.
- No hazard to humans at working concentrations.
- Through tested-favourable user response.
EXTINGUISHING
GAS
FS 49 C2 was developed as a
replacement agent for Halon 1301 offering the same optimum
characteristics yet with minimum impact on the environment.
The result was a gas blend, in which the main components
include the most used replacement gases for cooling system
with an ODP factor of zero. FS 49 C2 has nearly the same
physical characteristics as Halon 1301 and is therefore the
best choice for replacement of Halon 1301 in fixed
installations.
“DROP IN”
GAS
Replacing with FS 49 C2 will
save your major costs in upgrading your existing system.
Minor technical adjustments as well as slight increase in
gas storage capacity are all that are required.
FS 49 C2 has many of the same properties as Halon 1301, and
comparable extinguishing characteristics.
UPGRADE /
REPLACEMENT
Halon systems are installed
to protect computer systems, control rooms, engine rooms and
area where high fire risks is limited. When converting to FS
49 C2, a complete system analysis should be performed. This
extinguishing gas must fill the room quickly and efficiently
without reaching levels that endanger personnel. Assessment
of these factors should be left to the trained engineers.
NEW SYSTEMS
On final completion of the
work, detailed “as-installed” drawings are issued by
GIELLE to the customer, along with the appropriate
commissioning and conformity certification required by LPS
1204.
“DROP IN”
GAS
FS 49 C2 is the
extinguishing agent of choice in new systems as it is clean,
in use causes no damage to building interiors or equipment
and very quick-acting, which keeps fire damage to a minimum.
FS 49 C2 has an ideal weight/volume ratio. Like Halon 1301,
FS 49 C2 is condensed in the cylinder and stored in liquid
form. The required gas volume is 40% greater than Halon
1301. No other substitute gas on the market offers these
ideal properties. FS 49 C2 presents no hazard to humans at
the levels required for extinguishing the fires.
Gielle Srl - Establecimiento y Oficina Via R. Ferri 32 Z.I. - 70022 Altamura (Ba) Italy
Tel +39 0803118998 - Fax + 39 0803101309
E-mail: info@gielle.it
- Save in outlook
News & events
e-mail
fax
teléfono
